tag:blogger.com,1999:blog-26849621553687882012011-11-11T02:58:52.851-08:00Spezialschneidwerkzeuge (Fräser, Feinbohrwerkzeuge, Reibahlen, Bohrer, Gewindeschneidwerkzeuge) für hohe Zerspanungsleistung in der Luftfahrt-, Automobil-, Verteidigungs- und Maschinenbauindustrie allgemein.Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.comBlogger321100tag:blogger.com,1999:blog-2684962155368788201.post-84745293389543502422011-11-11T02:55:00.000-08:002011-11-11T02:58:52.863-08:00<a href="http://4.bp.blogspot.com/-5qZUpsQuDvs/Trz_SnMLyzI/AAAAAAAAAeg/ulpp7OFchTs/s1600/spline%2B1.jpg" onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}"><img style="float:left; margin:0 10px 10px 0;cursor:pointer; cursor:hand;width: 229px; height: 250px;" src="http://4.bp.blogspot.com/-5qZUpsQuDvs/Trz_SnMLyzI/AAAAAAAAAeg/ulpp7OFchTs/s320/spline%2B1.jpg" border="0" alt="" id="BLOGGER_PHOTO_ID_5673690325802797874" /></a><br /><div>IMPORTANT UPDATE RELEASE nr. 7 spline gauges</div><div><br /></div><div>Standards for spline gauges </div><div><br /></div><div>Spline gauges are used for inspection of splined shafts and Involute and straight spline Shafts. Updated formulas include now following standards (November 2011):</div><div><br /></div><div>DIN 5480 (March 2006)</div><div>DIN 5480 (September 1974)</div><div>DIN 5481:2005-06</div><div>DIN 5481 (January 1952)</div><div>DIN 5482 (March 1973)</div><div>ANSI B92.1-1996</div><div>ANSI B92.2M-1980</div><div><br /></div><div><br /></div><div>http://www.boch.net/gage.gif</div><div>http://www.boch.net/compa.gif</div><div>http://www.boch.net/dabaq2.JPG</div><div>http://www.boch.net/dabaq3.JPG</div><div>http://www.boch.net/dabaq4.JPG</div><div><br /></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-8474529338954350242?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-55724902040439259452011-11-11T02:53:00.000-08:002011-11-11T02:55:20.456-08:00<div>IMPORTANT UPDATE RELEASE nr. 6 Taper thread gauges</div><div><br /></div><div>A threaded pipe is a pipe with screw-threaded ends for assembly. The threaded pipes used in some plumbing installations for the delivery of gases or fluids under pressure have a threaded section that is slightly conical (in contrast to the cylindrical section commonly found on bolts and leadscrews). The seal provided by a threaded pipe joint depends upon the labyrinth seal created by the threads; upon a positive seal between the threads created by the deformation of the threads when they are tightened to the proper torque; and sometimes on the presence of a sealing coating, such as thread seal tape ("Teflon tape"), or a liquid or paste pipe sealant such as pipe dope. Accurate threads are known as "dry fit" or "dry seal" meaning that no sealant is required for a gas-tight seal. Such threads are needed where the sealant would contaminate or react with the media inside the piping (i.e. oxygen).</div><div>Dryseal pipe threads gauges ASME B1.20.5 have been recently added.</div><div>Updated formulas include now following standards:</div><div><br /></div><div>NPT American Standard Pipe Taper Thread</div><div>NPSC American Standard Straight Coupling Pipe Thread</div><div>NPTR American Standard Taper Railing Pipe Thread</div><div>NPSM American Standard Straight Mechanical Pipe Thread</div><div>NPSL American Standard Straight Locknut Pipe Thread</div><div>NPTF American Standard Pipe Thread Tapered (Dryseal)</div><div>BSPP British Standard Pipe Thread Parallel </div><div>BSPT British Standard Pipe Thread Tapered</div><div><br /></div><div>Significative updates have been made here, especially or MJ threads, often referred to as “J” threads, mainly used in the aerospace industry, and dryseal thread B1.20.5, the full list at today (November 2011) of supported standards is:</div><div><br /></div><div>Pipe threads for tubes and fittings BS21:1985</div><div>Pipe threads ANSI/ASME B1.20.1-1983 (NPT)</div><div>Pipe threads ISO 7/2 - 1982(E)</div><div>Pipe threads ISO 7/2:2000 (EN 10226:2005)</div><div>Pipe threads DIN 2999</div><div>Whitworth pipe threads DIN 3858/Factory standard</div><div>Pipe threads DIN 158</div><div>Gas valve threads DIN 477</div><div>Dryseal pipe threads ASME B1.20.5</div><div>Taper pipe threads JIS B 0253 -1985</div><div>ISO metric threads DIN ISO 965:1998</div><div>Trapezoidical threads DIN 103:1997</div><div>Thread tapes according to DIN 802</div><div>Unified threads ANSI/ASME B1.1-1989(R2001)/B1.2</div><div>Unified threads ANSI/ASME B1.1-2003 / ASME B1.2</div><div>UNJ Aerospace threads ISO 3161:1999 (ASME B1.15)</div><div>Pipe threads according to ISO 228:2000</div><div>Steel conduit threads DIN 40431:1972</div><div>Whitworth threads acc.BS 84:2007, BS 919-2:2007</div><div>Pipe threads according to DIN 259 (old)</div><div>Metrical HELICOIL threads BOELLHOFF standard</div><div>Knuckle threads according to DIN 405:1997</div><div>Unified threads ANSI B1.1-1989/BS 919-1:2007</div><div>Unified threads ANSI B1.1-2003/BS 919-1:2007</div><div>Buttress threads DIN 513/Factory standard</div><div>MJ threads DIN ISO 5855 : 2009</div><div>Bolt (external) screw thread for transition fits tol. zone (DIN 13, part 51)</div><div>Unified HELICOIL threads Boellhoff standard</div><div>Unified HELICOIL threads MS 33537-1994</div><div>NPSM Cyl.pipe threads ANSI/ASME B1.20.1-1983 (2001)</div><div>NPSF Cyl. Dryseal Pipe Threads ANSI B1.20.3-1976</div><div>Threads for valves DIN 7756 - February 1979</div><div>Threads for valves ETRTO V.7 - 1999</div><div>Gages for ISO metric threads ANSI B1.16-M</div><div>Gages for ISO metric threads BS919-3:2007</div><div>Metric M screw threads NF E 03-152/153</div><div>Unified threads French standard CNOMO GE40-008N</div><div>ACME screw threads ASME/ANSI B1.5-1997</div><div>Stub ACME screw threads ASME/ANSI B1.8-1988</div><div>Buttress Threads 7 deg. 45 deg. ANSI B1.9-1973</div><div>Metric thread inserts DIN 8140:1999</div><div>Galvanized threads DIN ISO 965 (Parts 4,5):2002</div><div>Thread setting gauges DIN 2241</div><div>Threads for bicycles DIN 79012:1960</div><div>Thread gauges according to "VW Norm 13003"</div><div>Thread gauges according DIN 11 (old standard, still common)</div><div>Gas cylinder connections DIN 477 (Part 1)</div><div>Thread gauges according Swiss Standard NIHS 60-30</div><div>ACME threads with clearance for rail vehicles DIN 263:2000</div><div>Buttress threads DIN 20401:1984 / Factory standard</div><div>Cycle threads "BSC" BS 811:1950 / BS 919-2:2007</div><div><br /></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-5572490204043925945?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-76030838151276185902011-11-11T02:52:00.000-08:002011-11-11T02:53:44.142-08:00<div>IMPORTANT UPDATE RELEASE nr. 5 Verniers</div><div><br /></div><div>No significant changes here.</div><div><br /></div><div>• DIN 862 - 1988</div><div>• British Standard BS 887</div><div>• French Standard NF E 11-091</div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-7603083815127618590?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-74885272569509408032011-11-11T02:51:00.000-08:002011-11-11T02:52:17.978-08:00<div>IMPORTANT UPDATE RELEASE nr. 4 Thread gauges</div><div><br /></div><div>Actual release (November 2011) includes:</div><div><br /></div><div>• ISO Metric threads, DIN ISO 1502 (DIN 13)</div><div>• ISO Metric threads, ANSI B1.16M</div><div>• Metric ISO Trapezoidal threads, DIN 103</div><div>• Unified threads and thread gauges, ANSI/ASME B1.1 u. B1.2</div><div>• Thread gauges for Unified threads, BS 919 (Part 1)</div><div>• Gauges for pipe threads, DIN ISO 228</div><div>• Steel conduit threads, DIN 40430, 40431</div><div>• Knuckle threads, DIN 405</div><div>• Buttress threads and gauges, DIN 513 /Factory standard</div><div>• Gauges for wire thread inserts for metric threads, DIN 8140</div><div>• Gauges for screw threads of Whitworth form, British standard BS 84 / BS 919 (Part 2)</div><div>• NPSM pipe threads, ANSI/ASME 1.20.1</div><div>• Aerospace MJ threads, DIN ISO 5855</div><div>• Gauges for Metric and Unified thread inserts, Böllhoff factory standard</div><div>• Threads for valves and tyres, DIN 7756 and ETRTO V.7</div><div>• Metric threads, NF E 03-152/153 (GE40-010N)</div><div>• Unified threads, CNOMO GE40-008N (PSA, Renault)</div><div>• ACME threads, ANSI B1.5 - 1988</div><div>• Stub-ACME threads, ANSI B1.8 - 1988</div><div>• Buttress threads 7°/45°, ANSI B1.9 - 1973</div><div>• Hot-dip galvanized threads, DIN ISO 965:2002</div><div><br /></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-7488527256950940803?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-73453498472660293072011-11-11T02:50:00.000-08:002011-11-11T02:51:08.712-08:00<div>IMPORTANT UPDATE RELEASE nr. 3 Plain gauges</div><div><br /></div><div>New releases have ben made for DIN 2250-1 and BS 969, as well as for Volkswagen standard.</div><div><br /></div><div>Actual release (November 2011) includes:</div><div><br /></div><div>• DIN-ISO 286 – 1</div><div>• DIN-ISO 286 – 2</div><div>• French Standard NF E 02-202 (GE40-001N)</div><div>• Master rings, BS 4064 : 1966</div><div>• Master rings BS 4065 : 1966</div><div>• Master rings, French Standard NF E 11-011</div><div>• ISO 286-2 (js2)</div><div>• DIN ISO 286 (DIN 7150:2007)</div><div>• DIN 2250-1 : October 2008</div><div>• BS 969:2008</div><div>• ANSI/ASME B89.1.6M - 1984</div><div>• BS 4064 (Metric) : 1966</div><div>• BS 4065 (Inch) : 1966</div><div>• NF E 02-202 (GE40-001N)</div><div>• NF E 11-011</div><div>• VW 190206</div><div>• VW 193260</div><div><br /></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-7345349847266029307?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-55230691282082070182011-11-11T02:49:00.000-08:002011-11-11T02:50:02.623-08:00<div>IMPORTANT UPDATE RELEASE nr. 2 Dial gauges</div><div><br /></div><div>No changes for DIN 878 (Oct 1983), DIN 879 (Jun 1999), DIN 2270 (1985) (Germany), UNI 4180, UNI 9954 (Italy), IS : 2967 (India) or NF-E-11 (France).</div><div>New standards have been defined for inductive gauges and for edge finder gauges. Recent added formulas for calculations of dial gauges refer to: </div><div><br /></div><div>New standards (India) for dial gauges IS : 2092-1983 and lever dial gauges IS : 11498-1985</div><div>New standards have been defined for edge finding gauges.</div><div>New standard for digital gauges NF E11-056 (France)</div><div>NF XP E11-53 digital (France) </div><div>India IS : 2092-1983</div><div>India IS : 11498-1985</div><div>United States ASME/ANSI B89.1.10M - 2001</div><div>Japan JIS B7503</div><div>Japan JMAS 2001</div><div>Korea KS B5206</div><div>Korea JIS B7533</div><div>Korea KS B5238</div><div><br /></div><div>A new procedure defines the maximum tolerance admitted every 10 divisions. Before it was only for 1, 5 graduation, 50% of one revolution and 100% of one revolution.</div><div>A new procedure contains evaluation and tolerancing of both sensitivity and linearity in the measuring range.</div><div>In particular, there is now a limitation of the linearity, after adjustment of sensitivity.</div><div>ANSI/ASME introduced repeatibiliy check at 25%, 50% and 75% of measuring range, and a set of tolerances after the 1.turn, between 2 and 10 turns, between 10 and 20 turns, and for more than 20 turns.</div><div>Analysis of deviation is performed, in both directions (positive or negative deviation) after one turn, after two turns, between 2 and 10 turns, between 10 and 20 turns, and for more than 20 turns.</div><div><br /></div><div>Korean norms introduces a set of tolerances for short or long range, and a specific related tolerance for T neighboring. Also the increment for short and long range is standardized.</div><div><br /></div><div>Actual release (November 2011) includes:</div><div><br /></div><div>• Dial gauges, DIN 878 - 1983</div><div>• Dial indicators, DIN 879 - 1999</div><div>• Dial test indicators, DIN 2270 - 1985</div><div>• Dial gauges, ASME/ANSI B89.1.10M</div><div>• Dial gauges, French Standard NF E 011-50</div><div>• Dial test indicators, French Standard XP E 11-053 : 2000</div><div>• Dial gauges, Japanese Standard JIS B 7503-1992</div><div>• Dial gauges, British Standard BS 907-1965</div><div>• Dial test indicators, British Standard BS 2795-1981</div><div>• Dial gauges and Test indicators, Australian Standard AS 2103</div><div>• Dial gauges (0.01 mm Graduation), Korean Standard KS B 5206-1984</div><div>• Dial gauges (0.001 mm Grad.), Korean Standard KS B 5207-1984</div><div>• Dial test indicators, Korean Standard KS B 5238-1976</div><div><br /></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-5523069128208207018?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-67450525897957075662011-11-11T02:47:00.001-08:002011-11-11T02:49:01.024-08:00<div>IMPORTANT UPDATE RELEASES</div><div><br /></div><div>There have been recently updates in calibration standards, involving different types of length measuring instruments, such as: </div><div><br /></div><div>1. micrometers</div><div>2. dial gauges</div><div>3. plain gauges (bth plug and ring gauges)</div><div>4. parallel thread gauges (bth plug and ring gauges)</div><div>5. verniers</div><div>6. taper thread gauges</div><div>7. spline gauges</div><div><br /></div><div>It is important to update the calibration procedures used by calibration labs and metrology departments, if in-site calibration is performed. </div><div>Let's have a look here at the most relevant changes.</div><div><br /></div><div>These BS standard have been reviewed.</div><div>previous standard BS 870:1950, new release is BS 870:2008</div><div>previous standard BS 6468:1984, new release is BS 6468:2008</div><div>previous standard BS 959:1950, new release is BS 959:2008</div><div><br /></div><div>The BS update also refers to extensions according to following standards:</div><div><br /></div><div>previous standard BS 870:1950, new release is BS 870:2008</div><div>previous standard BS 6468:1984, new release is BS 870:2008</div><div>previous standard BS 959:1950, new release is BS 959:2008</div><div><br /></div><div>Following standards for extensions have been added, they were not previously included:</div><div><br /></div><div>DIN 863-1:1999</div><div>DIN 863-2:1999</div><div>IS:2967-1983(1998)</div><div>DIN 863-2:1999</div><div>NF E 11-090 (December 1993)</div><div>NF E 11-097 (February 1998)</div><div><br /></div><div>Actual release (November 2011) includes:</div><div><br /></div><div>• Micrometers (any type), DIN 863 – 1999 (Part 1-4)</div><div>• External micrometers, British Standard BS 870-2008 (has been updated)</div><div>• Internal micrometers, British Standard BS 959-2008 (has been updated)</div><div>• Depth micrometers, British Standard BS 6468-2008 (has been updated)</div><div>• Micrometer heads, British Standard BS 1734 : 1951</div><div>• Micrometers (any type), Federal Specification (USA) GGG-C105 C–1987</div><div>• External micrometers, Australian Standard AS 2102</div><div>• Internal micrometers, Australian Standard AS 2101 : 1978</div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6745052589795707566?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-8106075808351815762010-11-20T03:09:00.000-08:002010-11-20T03:16:42.539-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TOeuEXnx7yI/AAAAAAAAAbw/nrIXxe0O0iE/s1600/Luca%2Band%2BTarja%2BHalonen.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 400px; height: 266px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TOeuEXnx7yI/AAAAAAAAAbw/nrIXxe0O0iE/s400/Luca%2Band%2BTarja%2BHalonen.jpg" alt="" id="BLOGGER_PHOTO_ID_5541589256586260258" border="0" /></a><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_exJ1HPwfImg/TOet1kZDK6I/AAAAAAAAAbo/KfVy6lqzGuY/s1600/Laatuinnovaatio_logo_eng%2B300%2Bdp%2BRGB.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 318px; height: 400px;" src="http://3.bp.blogspot.com/_exJ1HPwfImg/TOet1kZDK6I/AAAAAAAAAbo/KfVy6lqzGuY/s400/Laatuinnovaatio_logo_eng%2B300%2Bdp%2BRGB.jpg" alt="" id="BLOGGER_PHOTO_ID_5541589002316098466" border="0" /></a><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_exJ1HPwfImg/TOetP2DJUEI/AAAAAAAAAbY/xOgmZ0TQXck/s1600/Luca%2B1.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 400px; height: 266px;" src="http://2.bp.blogspot.com/_exJ1HPwfImg/TOetP2DJUEI/AAAAAAAAAbY/xOgmZ0TQXck/s400/Luca%2B1.jpg" alt="" id="BLOGGER_PHOTO_ID_5541588354221035586" border="0" /></a><span style="font-weight: bold;">Tarja Halonen tunnustas Eesti ettevõtteid Kvaliteediinnovatsiooni auhinnaga</span><br /><br />Tervisliku Piima Biotehnoloogiate Arenduskeskus OÜ ja Feanor OÜ võitsid täna õhtul Soomes Kvaliteediinnovatsiooni auhinna. Eritunnustuse pälvis AS Vähiuuringute Tehnoloogia Arenduskeskus.<br /><br />Soome presidendi Tarja Haloneni osalusel anti täna õhtul Helsingis, rahvusvahelisel kvaliteedipäeval, Soome kvaliteediauhinna galal Eesti ettevõtetele üle kvaliteediinnovatsiooni auhinnad.<br /><br />„Õnnitlen võitjaid! Teie saavutus on kiiduväärt mitmes mõttes. Esiteks annab see tõestust selle kohta, et ettevõtluse ja teaduse koostöö on viljakandev. Samas olete teistele eeskujuks seetõttu, et saavutasite tunnustuse rahvusvahelisel konkursil, sest Eesti ettevõtluse rahvusvahelistumine peab saama argipäevaks,“ sõnas majandus- ja kommunikatsiooniminister Juhan Parts. „Jäite silma oma ala rahvusvahelistele spetsialistidele, kes on selle auhinnaga öelnud, et teie koduturuks võib juba homme olla kogu maailm.“<br /><br />Tervisliku Piima Biotehnoloogiate Arenduskeskusele tõi Kvaliteediinnovatsiooni auhinna uudne Eestis leiutatud ja kliiniliselt katsetatud vererõhku alandav mikroobitüvi TENSIA ning Feanor OÜ-le freesimise terad, mis aitavad saavutada märkimisväärset aja- ja ressursisäästu.<div style="display: none ! important; visibility: hidden ! important; position: absolute ! important; height: auto ! important; width: auto; z-index: 1410065406 ! important; border: 1px solid rgb(0, 67, 179) ! important; -moz-border-radius: 3px 3px 3px 3px ! important; vertical-align: middle ! important; padding: 1px ! important; margin: 0px ! important; color: rgb(0, 0, 0) ! important; background-color: rgb(255, 255, 204) ! important; font-family: Arial ! important; font-size: 13px ! important; line-height: normal ! important; font-weight: normal ! important; left: 148px ! important; top: 727px ! important;" id="gmBFhv"></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-810607580835181576?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-6730573860990718662010-11-13T12:37:00.000-08:002010-11-13T12:39:37.428-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/TN73gSULKwI/AAAAAAAAAbA/FReOCMps1aE/s1600/Premiazione%2Bvincitori%2BEstonia.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 400px; height: 266px;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/TN73gSULKwI/AAAAAAAAAbA/FReOCMps1aE/s400/Premiazione%2Bvincitori%2BEstonia.jpg" alt="" id="BLOGGER_PHOTO_ID_5539136725756619522" border="0" /></a><br />Christmas tree carbide cutters win 2010 Finnish Quality Award<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-673057386099071866?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-55618833439757491332010-11-13T12:33:00.000-08:002010-11-13T12:42:20.890-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_exJ1HPwfImg/TN74IsWXPeI/AAAAAAAAAbI/ZEkX2KMRoWA/s1600/Premiazione%2BHalonen%2B1.jpg"><img style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;width: 400px; height: 266px;" src="http://2.bp.blogspot.com/_exJ1HPwfImg/TN74IsWXPeI/AAAAAAAAAbI/ZEkX2KMRoWA/s400/Premiazione%2BHalonen%2B1.jpg" border="0" alt=""id="BLOGGER_PHOTO_ID_5539137419939888610" /></a><br />Feanor receives 2010 Finnish Innovation Award by Finnish Prime Minister Tarja Halonen.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-5561883343975749133?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-68072751477751407862010-11-12T02:55:00.001-08:002010-11-12T02:57:33.875-08:00Feanor OÜ partner UFP recently acquired a new tool-grinding facility beneath Beretta plant, close to Brescia, Italy.<br />This will allow us to work now really 'side by side' with Beretta, one of the few Europena companies with more than 500 years uninterrupted manufacturing history, including cutting tool grinding and development also for Maryland, US plant. http://www.berettadefence.com<br /><br /><br />Feanor OÜ partner UFP omandas hiljuti uue rajatise Beretta tehase all Brescias, Itaalias, mis valmistab ja teritab erilisi löikeriistu.<br />See võimaldab meil töötada tõepoolest "kõrvuti" koos Berettaga, üks vähestest Euroopa ettevõtet ajalooga rohkem kui 500 aastat. UFP toodangut kasutavad muuhulgas ka Marylandi tehas USAs. http://www.berettadefence.com<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6807275147775140786?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-38455987840116703022010-11-12T02:55:00.000-08:002011-01-25T05:49:48.115-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TT7U4dlKRcI/AAAAAAAAAc8/pif6Er7pR1o/s1600/HSS_01.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 240px; height: 320px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TT7U4dlKRcI/AAAAAAAAAc8/pif6Er7pR1o/s320/HSS_01.jpg" alt="" id="BLOGGER_PHOTO_ID_5566120255954765250" border="0" /></a><br />Feanor OÜ partner recently acquired a new tool-grinding facility beneath Beretta plant, close to Brescia, Italy.<br />This will allow us to work now really 'side by side' with Beretta, one of the few European companies with more than 500 years uninterrupted manufacturing history, including cutting tool grinding and development also for Maryland, US plant. http://www.berettadefence.com<br /><br /><br />Feanor OÜ partner omandas hiljuti uue rajatise Beretta tehase all Brescias, Itaalias, mis valmistab ja teritab erilisi löikeriistu.<br />See võimaldab meil töötada tõepoolest "kõrvuti" koos Berettaga, üks vähestest Euroopa ettevõtet ajalooga rohkem kui 500 aastat. UFP toodangut kasutavad muuhulgas ka Marylandi tehas USAs. http://www.berettadefence.com<div style="display: none ! important; visibility: hidden ! important; position: absolute ! important; height: auto ! important; width: auto; z-index: 1410065406 ! important; border: 1px solid rgb(0, 67, 179) ! important; -moz-border-radius: 3px 3px 3px 3px ! important; vertical-align: middle ! important; padding: 1px ! important; margin: 0px ! important; color: rgb(0, 0, 0) ! important; background-color: rgb(255, 255, 204) ! important; font-family: Arial ! important; font-size: 17px ! important; line-height: normal ! important; font-weight: normal ! important; left: 114px ! important; top: 302px ! important;" id="gmBFhv"></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-3845598784011670302?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-12660551738948976272010-09-13T07:48:00.000-07:002010-09-13T07:54:37.335-07:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_exJ1HPwfImg/TI46tYg5XqI/AAAAAAAAAag/UkIl61AeXRY/s1600/DSCF0577.JPG"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 240px;" src="http://3.bp.blogspot.com/_exJ1HPwfImg/TI46tYg5XqI/AAAAAAAAAag/UkIl61AeXRY/s320/DSCF0577.JPG" alt="" id="BLOGGER_PHOTO_ID_5516411144924389026" border="0" /></a>Feanor osales MTA näitusel Ho Chi Minh linnas juulis 2010. Oleme eriti huvitatud motorollerite ja sarnaste liiklusvahendite turuosast. Oleme teinud koostööd firmaga Piaggio Itaalias ja soovime pakkuda lõikeriistu ka teistele tootjatele nagu Kawasaki, Honda, Suzuki, Kymco kuigi on raske pakkuda lõikeriistu Jaapani tootjatele, mis traditsiooniliselt alati kasutavad Jaapani brände.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-1266055173894897627?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-20950389420067337742010-09-06T00:36:00.000-07:002010-09-06T01:07:55.830-07:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TIShVP_lu5I/AAAAAAAAAZ4/Y2Ioj8kOtXY/s1600/nuke.JPG"><img style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;width: 320px; height: 292px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TIShVP_lu5I/AAAAAAAAAZ4/Y2Ioj8kOtXY/s320/nuke.JPG" border="0" alt=""id="BLOGGER_PHOTO_ID_5513709230250900370" /></a><br />Feanor OÜ on osalev erinevate suurustega F tüüpi freeside väljatöötamises ja varustamises, mida Shanghai Electric (Hiina) kasutab tuumaenergia seadmete tootmises. F Freese hakatakse kasutama olemasolevate Ingersoll masinate terade tootmises. Teine katse tehakse ka Shanghai electricu valmistatud freesmasinatel. Disain peab olema lõpetatud enne oktoobrit ja katsetamine enne 2010 lõppu<br /><br /><br />Keywords:<br />Hiina Eesti, eesti tuumaenergia,tuumaenergia tootmise, turbiinid, spetsiaalseid tööriistu, turbiini tootmiseks, tera tootmine, turboshaft<br /><br />Source: Feanor<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-2095038942006733774?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-526331602224366042010-09-06T00:25:00.000-07:002010-12-30T13:36:42.786-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TIShoGJViNI/AAAAAAAAAaA/XjmxLGooi7g/s1600/1.JPG"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 320px; height: 240px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TIShoGJViNI/AAAAAAAAAaA/XjmxLGooi7g/s320/1.JPG" alt="" id="BLOGGER_PHOTO_ID_5513709554024941778" border="0" /></a><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TISZEYKEejI/AAAAAAAAAZg/kl-PeCPMkv4/s1600/HSS_06.jpg"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 240px; height: 320px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TISZEYKEejI/AAAAAAAAAZg/kl-PeCPMkv4/s320/HSS_06.jpg" alt="" id="BLOGGER_PHOTO_ID_5513700144291543602" border="0" /></a><br />Feanor OÜ on edukalt katsetanud solid carbide (HM) joodetud freesimine läbilõikamist koos 40°helixiga, ilma katteta ja uue Zirc kattega, valmistab Aluminim sulameid kasutamiseks lennutehnikas.<br />See lõikeriist on konkureerinud teiste tootjatega Saksamaalt, Iisraelist ja Jaapanist ning seda kasutatakse Hiina suurima lennukite tootja Liming mootorites.<br />Samuti spetsiaalne juhitud karbiid frees on efektiivne kiire titaanisulamist komponentide tootmises.<br />Hiina arendab oma turboshaft mootoreid J-11 hävitaja jaoks ja uue 5. põlvkonna J-XX Stealth hävitaja (4. põlvkonna vastavalt hiina määratlusele) jaoks, mis algselt põhines vene disainil.<br /><br /><br />Keywords:<br />Freesid, titaanisulamist komponentide tootmises, eesti tooristad, lennutehnika<br /><br />Source: Feanor<div style="display: none ! important; visibility: hidden ! important; position: absolute ! important; height: auto ! important; width: auto; z-index: 1410065406 ! important; border: 1px solid rgb(0, 67, 179) ! important; -moz-border-radius: 3px 3px 3px 3px ! important; vertical-align: middle ! important; padding: 1px ! important; margin: 0px ! important; color: rgb(0, 0, 0) ! important; background-color: rgb(255, 255, 204) ! important; font-family: Arial ! important; font-size: 17px ! important; line-height: normal ! important; font-weight: normal ! important; left: 544px ! important; top: 382px ! important;" id="gmBFhv"></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-52633160222436604?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com1tag:blogger.com,1999:blog-2684962155368788201.post-3863377703320116832010-06-21T05:15:00.000-07:002010-06-21T05:19:28.503-07:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/TB9YmhdsV9I/AAAAAAAAAZY/_nEzNX6IOXw/s1600/vetrinetta+feanor.jpg"><img style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;width: 320px; height: 240px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/TB9YmhdsV9I/AAAAAAAAAZY/_nEzNX6IOXw/s320/vetrinetta+feanor.jpg" border="0" alt=""id="BLOGGER_PHOTO_ID_5485200290001737682" /></a><br />MTA Vietnam <br /><br />UFP and Feanor will exhibit at MTA Vietnam, machine Tools Show, booth AK 4-4 within the premises of the Italian Technology Pavillion.<br />Exhibition website <a href="http://www.mtavietnam.com/">MTA</a> http://www.mtavietnam.com <br /><br />MTA Machine Tools Show Vietnam<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-386337770332011683?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-25119663197119954352010-06-10T14:03:00.001-07:002010-06-10T14:03:43.623-07:00Feanor OU has been granted participation to a tender for development and supply of F type cutters for manufacturing of nuclear power generation equipment by Shanghai Electric (China). F Cutters will be used for blade manufacturing on existing Ingersoll machines. Design is planned to start in the next weeks and testing will be held in Shanghai in October 2010.<div style="display: none ! important; visibility: hidden ! important; position: absolute ! important; height: auto ! important; width: auto; z-index: 1410065406 ! important; border: 1px solid rgb(0, 67, 179) ! important; -moz-border-radius: 3px 3px 3px 3px ! important; vertical-align: middle ! important; padding: 1px ! important; margin: 0px ! important; color: rgb(0, 0, 0) ! important; background-color: rgb(255, 255, 204) ! important; font-family: Arial ! important; font-size: 13px ! important; line-height: normal ! important; font-weight: normal ! important; left: 280px ! important; top: 212px ! important;" id="gmBFhv"></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-2511966319711995435?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-46973563852803991882010-06-10T14:00:00.000-07:002010-06-10T14:06:45.871-07:00Feanor OU successfully tested HM brazed milling cutters with 40° helix, without coating and with a new Zirc coating, in manufacturing of Aluminium alloys for aerospace.<br />This cutter has been competing against other manufacturers from Germany, Israel and Japan and will be used in the largest Chinese manufacturer of military aircraft engines.<br />Also a special guided reamer in solid carbide has been found effective in manufacturing high speed Titanium alloy components and testing will be completed within one month.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-4697356385280399188?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-29721499568675264202010-05-15T09:20:00.000-07:002010-07-31T22:11:17.288-07:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_exJ1HPwfImg/S-7N9vFPONI/AAAAAAAAAZQ/uytNt72yDK4/s1600/zolotaia+medal+s.JPG"><img style="float: right; margin: 0pt 0pt 10px 10px; cursor: pointer; width: 225px; height: 320px;" src="http://2.bp.blogspot.com/_exJ1HPwfImg/S-7N9vFPONI/AAAAAAAAAZQ/uytNt72yDK4/s320/zolotaia+medal+s.JPG" alt="" id="BLOGGER_PHOTO_ID_5471537057795881170" border="0" /></a><br />Feanor OÜ has been awarded Gold Medal Prize from Ministry of Production - Russian Federation, for its activity and in design and development of special cutting tools.<br /><br />We are looking forward - says Luca Bochese - to increase our cooperation with Russian companies, in development of cost-effective manufacturing technologies, special measuring equipment and participation to R&amp;D projects. We have a full range of interests, from cutting tools for turboshaft engines and extreme hard surfaces, OEM applications of laser interferometry and manufacturing and measurement technology of face gears for use on aerospace transmissions.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-2972149956867526420?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-18215121829445407712009-03-01T00:50:00.000-08:002009-03-01T00:52:22.070-08:00Questi i temi di Hannover Messe 2009: Automazione Industriale, Motion, Drive &amp; Automation, Fabrica Digitale, Subappalto, Energia (focus su Eolico), Power Plant Technology, Aria Compressa, Tecnologie per Lavorazione Superfici e Microtecnologie, infine il padiglione 2 dedicato alla Research &amp; Technology. <span style="font-weight: bold;">FEANOR</span> partecipa all'interno dello stand <span style="font-weight: bold;">EMLIIT</span> (Confederazione Industriale Estonia - <span style="font-weight: bold;">Halle 2- D65</span>) e presenta novità nel settore utensili speciali, software controllo qualità e ricerca su sistemi di misura.<br />Come ormai di consueto, la parte cartacea (il catalogo non viene più stampato) è sostituita da un efficiente browser su web ed un CD, contenente tutti i dati degli espositori, manuali, cataloghi,listini, che può essere richiesto dal sito.<br />Per maggiori infirmazioni visitare il sito ufficiale della fiera www.hannovermesse.de<br /><br /><span style="color: rgb(204, 0, 0); font-weight: bold;">Per scaricare il biglietto invito gratuito alla manifestazione collegati e registrati al link </span><a href="http://www.hannovermesse.de/ticketregistration?Rg8bq49s2ts7m7">http://www.hannovermesse.de/ticketregistration?Rg8bq49s2ts7m7</a><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-1821512182944540771?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com1tag:blogger.com,1999:blog-2684962155368788201.post-36564354211896689532009-02-04T02:07:00.000-08:002011-01-17T09:43:51.108-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/SYlpHLAtrfI/AAAAAAAAAX4/NDhBqnxYZ3w/s1600-h/cern.JPG"><img style="margin: 0pt 0pt 10px 10px; float: right; cursor: pointer; width: 249px; height: 320px;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/SYlpHLAtrfI/AAAAAAAAAX4/NDhBqnxYZ3w/s320/cern.JPG" alt="" id="BLOGGER_PHOTO_ID_5298882008513883634" border="0" /></a><!--[if gte mso 9]><xml> <w:worddocument> <w:view>Normal</w:View> <w:zoom>0</w:Zoom> <w:punctuationkerning/> <w:drawinggridverticalspacing>7.8 b.</w:DrawingGridVerticalSpacing> <w:displayhorizontaldrawinggridevery>0</w:DisplayHorizontalDrawingGridEvery> <w:displayverticaldrawinggridevery>2</w:DisplayVerticalDrawingGridEvery> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:SaveIfXMLInvalid> <w:ignoremixedcontent>false</w:IgnoreMixedContent> <w:alwaysshowplaceholdertext>false</w:AlwaysShowPlaceholderText> <w:compatibility> <w:spaceforul/> <w:balancesinglebytedoublebytewidth/> <w:donotleavebackslashalone/> <w:ultrailspace/> <w:donotexpandshiftreturn/> <w:adjustlineheightintable/> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:usefelayout/> </w:Compatibility> <w:browserlevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:latentstyles deflockedstate="false" latentstylecount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normální tabulka"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <w:worddocument> <w:view>Normal</w:View> <w:zoom>0</w:Zoom> <w:punctuationkerning/> <w:drawinggridverticalspacing>7.8 b.</w:DrawingGridVerticalSpacing> <w:displayhorizontaldrawinggridevery>0</w:DisplayHorizontalDrawingGridEvery> <w:displayverticaldrawinggridevery>2</w:DisplayVerticalDrawingGridEvery> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:SaveIfXMLInvalid> <w:ignoremixedcontent>false</w:IgnoreMixedContent> <w:alwaysshowplaceholdertext>false</w:AlwaysShowPlaceholderText> <w:compatibility> <w:spaceforul/> <w:balancesinglebytedoublebytewidth/> <w:donotleavebackslashalone/> <w:ultrailspace/> <w:donotexpandshiftreturn/> <w:adjustlineheightintable/> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:usefelayout/> </w:Compatibility> <w:browserlevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:latentstyles deflockedstate="false" latentstylecount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normální tabulka"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <w:worddocument> <w:view>Normal</w:View> <w:zoom>0</w:Zoom> <w:punctuationkerning/> <w:drawinggridverticalspacing>7.8 b.</w:DrawingGridVerticalSpacing> <w:displayhorizontaldrawinggridevery>0</w:DisplayHorizontalDrawingGridEvery> <w:displayverticaldrawinggridevery>2</w:DisplayVerticalDrawingGridEvery> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:SaveIfXMLInvalid> <w:ignoremixedcontent>false</w:IgnoreMixedContent> <w:alwaysshowplaceholdertext>false</w:AlwaysShowPlaceholderText> <w:compatibility> <w:spaceforul/> <w:balancesinglebytedoublebytewidth/> <w:donotleavebackslashalone/> <w:ultrailspace/> <w:donotexpandshiftreturn/> <w:adjustlineheightintable/> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:usefelayout/> </w:Compatibility> <w:browserlevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:latentstyles deflockedstate="false" latentstylecount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normální tabulka"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--> <!--[if gte mso 9]><xml> <w:worddocument> <w:view>Normal</w:View> <w:zoom>0</w:Zoom> <w:punctuationkerning/> <w:drawinggridverticalspacing>7.8 b.</w:DrawingGridVerticalSpacing> <w:displayhorizontaldrawinggridevery>0</w:DisplayHorizontalDrawingGridEvery> <w:displayverticaldrawinggridevery>2</w:DisplayVerticalDrawingGridEvery> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:SaveIfXMLInvalid> <w:ignoremixedcontent>false</w:IgnoreMixedContent> <w:alwaysshowplaceholdertext>false</w:AlwaysShowPlaceholderText> <w:compatibility> <w:spaceforul/> <w:balancesinglebytedoublebytewidth/> <w:donotleavebackslashalone/> <w:ultrailspace/> <w:donotexpandshiftreturn/> <w:adjustlineheightintable/> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:usefelayout/> </w:Compatibility> <w:browserlevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:latentstyles deflockedstate="false" latentstylecount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normální tabulka"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <w:worddocument> <w:view>Normal</w:View> <w:zoom>0</w:Zoom> <w:punctuationkerning/> <w:drawinggridverticalspacing>7.8 b.</w:DrawingGridVerticalSpacing> <w:displayhorizontaldrawinggridevery>0</w:DisplayHorizontalDrawingGridEvery> <w:displayverticaldrawinggridevery>2</w:DisplayVerticalDrawingGridEvery> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:SaveIfXMLInvalid> <w:ignoremixedcontent>false</w:IgnoreMixedContent> <w:alwaysshowplaceholdertext>false</w:AlwaysShowPlaceholderText> <w:compatibility> <w:spaceforul/> <w:balancesinglebytedoublebytewidth/> <w:donotleavebackslashalone/> <w:ultrailspace/> <w:donotexpandshiftreturn/> <w:adjustlineheightintable/> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:usefelayout/> </w:Compatibility> <w:browserlevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:latentstyles deflockedstate="false" latentstylecount="156"> </w:LatentStyles> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normální tabulka"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><span style="line-height: 115%; color: rgb(34, 34, 34);font-family:Arial;font-size:100%;" lang="ET" >Feanori konstrueeritud spetsiaalseid täppiskäsihõõritsaid on edukalt kasutatud CERN´is (Genf – Šveits) tugeva (magnet)väljaga solenoidi kõrglegeersulamist komponentide tarvis.</span><span style="font-size:100%;"><br /></span><span style="line-height: 115%; color: rgb(34, 34, 34);font-family:Arial;font-size:100%;" lang="ET" ><br /></span><span style="line-height: 115%; color: rgb(34, 34, 34);font-family:Arial;font-size:100%;" lang="ET" >Mercury projekt on katsetuse printsiibil eksperiment uurimaks prootonivoo, tugeva magnetvälja ja suure prootonite arvuga elementide (high-Z) objektide (tuumade) vastastikust mõju.<br />Eksperiment on mitme rahvusvahelise labori vaheline taotlus, millele on alla kirjutanud ettevõte Muon Collider Collaboration. On konstrueeritud vabajoaga elavhõbeda sihtsüsteem, mis avaldab koosmõju suure võimsusega (1 –MW) prootonivooga tugevas magnetväljas (15 T). Elavhõbedajoa sihtmärk on konfigureeritud sisestamiseks tugeva (magnet)väljaga solenoidi 15 cm läbimõõduga avasse. Sihtmärki iseloomustab hermeetiliselt tihendatud primaarse kaitsekesta maht, mis on paigutatud sekundaarsesse kaitsekesta, et oleks tagatud elavhõbedaaurude isoleerimine ümbritsevast keskkonnast.<br />Joa läbimõõt on 1 cm ning kiirus kuni 20 m/s. Optiline diagnostikaseade on paigutatud sihtmärgi konstruktsiooni, et võimaldada elavhõbeda levimise vaatlemist, mis tuleneb 24 GeV prootonivoo ja impulsi kohta kuni 20 x 1012 prootoni vastastikusest mõjust. Sihtsüsteem sisaldab ka titaanisulamivoo aknaid primaarse ja sekundaarse kaitsekesta jaoks.<br /><br />„Feanor patenteeris ka energiatööstuse jaoks uue sisemise jahutusega kõvasulamist lõiketera, mis tagab efektiivsema töötlemise uutel töötlemistsentritel“, ütleb CEO Luca Bochese.</span><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-3656435421189668953?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-60251904591425002622009-02-04T01:55:00.000-08:002009-02-04T02:06:05.610-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/SYloIp8TlEI/AAAAAAAAAXg/j42f2_YIJoY/s1600-h/Su-30MK_1s.jpg"><img style="margin: 0pt 0pt 10px 10px; float: right; cursor: pointer; width: 220px; height: 233px;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/SYloIp8TlEI/AAAAAAAAAXg/j42f2_YIJoY/s320/Su-30MK_1s.jpg" alt="" id="BLOGGER_PHOTO_ID_5298880934485136450" border="0" /></a><br /><br /><br /><span style="font-weight: bold;">Eestis</span><span style="font-weight: bold;"> konst</span><span style="font-weight: bold;">rueeritud lõiketera, mida te</span><span style="font-weight: bold;">stiti ’Aerospace’ tööstuse jaoks</span><br /><br />Feanor patenteeris eelmisel aastal männipuidu (Christmas-tree) jaoks kõvasulamist lõiketera uue konstruktsiooni sisemise jahutusega, mis tagab efektiivsema töötlemise uutel töötlemistsentritel, kusjuures spindli pöörlemiskiirus on 2000 p/min. Sarnast konstruktsiooni kasutavad tõenäoliselt varsti meie konkurendid Jaapanis ja Saksamaal, seepärst peame me säilitama investeeringud innovatiivsetesse lahendustesse.<br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/SYloMawodMI/AAAAAAAAAXo/b1dAVCBehHs/s1600-h/turbine.jpg"><img style="margin: 0pt 0pt 10px 10px; float: right; cursor: pointer; width: 225px; height: 106px;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/SYloMawodMI/AAAAAAAAAXo/b1dAVCBehHs/s320/turbine.jpg" alt="" id="BLOGGER_PHOTO_ID_5298880999129117890" border="0" /></a><br />Me töötame praegu spetsiaalsete lõikurite kallal lennukimootori turbiini võllide jaoks põhiliselt Hiinas ja Indias. Me loodame varsti olla täiesti kvalifitseeritud täppislõiketerade tarnimiseks uue Koraput tehase jaoks Indias, mis hakkab tootma Indias tehtud turbiinivõlle ja -labasid Sukhoi MKI-30 hävitajate jaoks. Kosmosetööstust, eriti Hiinas, ei tohi mõjutada ülemaailmne finantskriis. <a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_exJ1HPwfImg/SYloRJGvF-I/AAAAAAAAAXw/r1J4_tm2tz4/s1600-h/tools+feanor+for+website.jpg"><img style="margin: 0pt 0pt 10px 10px; float: right; cursor: pointer; width: 137px; height: 103px;" src="http://3.bp.blogspot.com/_exJ1HPwfImg/SYloRJGvF-I/AAAAAAAAAXw/r1J4_tm2tz4/s320/tools+feanor+for+website.jpg" alt="" id="BLOGGER_PHOTO_ID_5298881080289335266" border="0" /></a><br /><br />Me saame üha rohkem päringuid Kaug-Idast ja üle 54% meie ülemaailmsetest uutest ärikontaktidest pärinevad nüüd Hiinast.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6025190459142500262?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-85531817882088056582009-01-06T05:54:00.000-08:002009-01-06T06:23:26.956-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_exJ1HPwfImg/SWNpPad1B8I/AAAAAAAAAWQ/4X7M7OJs9vs/s1600-h/feanor+china.JPG"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 359px; height: 269px;" src="http://4.bp.blogspot.com/_exJ1HPwfImg/SWNpPad1B8I/AAAAAAAAAWQ/4X7M7OJs9vs/s320/feanor+china.JPG" alt="" id="BLOGGER_PHOTO_ID_5288186100986480578" border="0" /></a><span style="font-weight: bold; color: rgb(153, 51, 0);font-size:180%;" >Feanor Oy suunnittelee metrologian RD-keskuksen perustamista Pekingiin</span><br /><br />Feanor on virolainen, seuraavalla kolmella alueella toimintaa harjoittava yritys:<br /><br />1. pituusmetrologian ja mittausjärjestelmät<br />2. tietojen hankintaan ja laatuun liittyvät ohjelmistot, mukaan lukien DOE, MSA, FMEA<br />3. erikoisvalmisteiset leikkaustyökalut<br /><br />Feanor aikoo perustaa sivuliikkeen Pekingiin 2009 kyetäkseen vastaamaan nopeammin asiakkaidensa tarpeisiin tehokkaiden, lentokoneteollisuuden sekä voimalaitosten tarpeisiin suunniteltujen turbiiniakseleiden ja lapojen valmistuksessa<br />Päätös on tehty kahden vuoden Kiinan markkinoilla toimimisen jälkeen voimalaitos-, auto- ja puolustusteknologian alalla.<br /><br />Kiina tarjoaa ylivoimaisesti suurimmat markkinamahdollisuudet pituusmetrologiaan ja erikoisleikkaustyökaluihin liittyville tuotteillemme Luca G. Bochese, Feanorin toimitusjohtaja, kertoo. Kiina muodostaa reilut 53 % globaalista potentiaalistamme, ja järjestyksessä seuraavana ovat Yhdysvallat (9 %), Intia (9 %), Italia (5 %) sekä muut EU-maat ja myös Venäjä, jonka potentiaali kasvaa nopeaan tahtiin. Olemme päättäneet aloittaa erikoisleikkaustyökalujen suunnittelulla, mutta laajennamme toimintaamme myös muille Feanorin toimialueille, mukaan lukien metrologian ja ohjelmistot.<br /><br /><br />Patentoimme lokakuussa 2007 uuden männyn leikkaukseen tarkoitetun, kokonaan karbidista valmistetun leikkausteknologian, joka on varustettu sisäänrakennetulla jäähdytyksellä mikä puolestaan mahdollistaa valmistusajan vähentämisen 1400 tunnista 900 tuntiin, mukaan lukien myös vastaavan työkalujen kustannussäästön. Uuden teknologian hyödyntäminen, mikä mahdollistaa erittäin tehokkaan leikkauksen, edellyttää nykyaikaisia ja kestäviä koneenteriä, ja olemme perehtyneet sovelluksen tarjoamiin etuihin muutamissa erittäin suurissa turbiinilaitoksissa Kiinassa ja Intiassa (hävittäjissä käytettävät ohjattavat suutinturboakselimoottorit).<br /><br /><br /><br /><span style="font-weight: bold; color: rgb(0, 0, 153);">Laserkalibrointijärjestelmät</span><br />Kiina on tällä hetkellä kolmanneksi suurin koneiden terien valmistaja, ja on siten ohittanut myös Italian, vaikka Italia onkin edelleen hyvissä asemissa vaihdettavien, erityistarkoituksiin suunniteltujen ja erittäin korkealaatuisten terien valmistuksessa. Doppler –laserinterferometrimme, joka laadittiin yhteistyössä Wroclawin teknisen yliopiston kanssa, ja aiempi laserdiodia hyödyntävä siirrettävä kalibrointilaite, joka kehitettiin yhteistyössä PTB:n (Physikalisch Technische Bundesanstalt) ja Braunschweigin kanssa, on yhä suositumpi Kiinassa, sillä sen ansiosta terien valmistajat kykenevät parantamaan geometrisiä parametreja, kuten esimerkiksi koneiden suoruutta, lineaarisuutta, yksitasoisuutta, akselin vertikaalisuutta entistä tehokkaammin.<br /><br /><br /><span style="color: rgb(0, 0, 153); font-weight: bold;">Tutkimustyö Kiinassa </span><br />Luca Bochese jatkaa... Tutkimustyön siirtämisestä Kiinaan on tullut meille myös eräänlainen “must”. Muutamat tekemämme ehdotukset ovat kiinnostaneet kovasti kiinalaisia viranomaisia ja akateemisia laitoksia, ja olemme käyneet mittavia neuvotteluja esimerkiksi kustannustehokkaan valmistusmenetelmän kehittämisestä helikoptereiden tehonsiirtoon, mikä parantaisi henkiinjäämistä ja vähentäisi myös helikopterin painoa. Lisäksi on neuvoteltu myös vaativiin teriin tarkoitetuista optisista mittausjärjestelmistä sekä mäntypuun leikkaukseen tarkoitetuista teristä (Kiina on tällä suurin turbiiniakseleiden valmistaja toimiessaan GE:n, Siemensin, Alstomin, Mitsubishin lisensseillä), ja muista erittäin kehittyneistä mittausteknologioista.<br /><br />Emme koskaan saaneet EU-rahoitusta, lukuun ottamatta PO4 SMT –hanketta standardisointia ja mittauksia varten vuonna 1999, mikä auttoi meitä suunnittelemaan tietojenkeräysohjelmiston siirrettäville laserkalibrointilaitteistoille Luca Bochese kertoo.<br />Tutkimusaloitteemme ovat kohdennettuja ja perustuvat aina asiakaan pyyntöön, lyhytkestoisia (korkeintaan 2 vuotta), kolmen tai neljän yhteistyökumppanin projekteja ja yleensä kustannuksiltaan matalia, ja EU: n puiteohjelmat rahoittavat yleensä suuria hankkeita integroitujen hankkeiden, NOE -projektien jne. muodossa kattaen siten ns. kriittisen massan, ja jotka yleensä ovat useiden tuhansien eurojen ja useamman yhteistyökumppanin projekteja.<br />Aloitteemme ovat yleensä olleet liian pieniä, vaikka jotkin tapaamamme EU –virkailijat olivatkin sitä mieltä ,että ideamme ovat erittäin mielenkiintoisia, käytännöllisiä ja voisivat olla todella onnistuneita sekä kyetä luomaan uusia "todellisia" innovatiivisia tuotteita.<br /><br /><span style="color: rgb(0, 0, 153); font-weight: bold;">Vaihteistot </span><br />Osa projekteistamme liittyy vaihteistolle tarkoitettuihin innovatiivisiin mittausjärjestelmiin, mukaan lukien tasopyörästön (face gear) käyttömahdollisuudet helikoptereiden tehonsiirrossa (korkea vääntömomentti ja nopeus) sekä muissa ilmailualan sovelluksissa, kuten ohjusten tai lentojen ohjaus- ja johtamisjärjestelmät, optiset vaihteistojen mittausjärjestelmät, terien mittausjärjestelmät.<br />Olemme aloittaneet aktiivisen yhteistyön näiden projektien puitteissa Pekingin teknisten instituutin ja Xianin teknisen yliopiston kanssa, jotka molemmat toimivat vaihteistojen mittausteknologian kanssa . Erityisesti Xianin teknisen yliopiston konesuunnitteluosasto kehittää parhaillaan uutta vaihteistojen mittauskeskusta ja Peking keskittyy taospyörästön mittausteknologiaan. Toivomme voivamme tehdä tulevaisuudessa tiivistä yhteistyötä kiinalaisten yhteistyökumppaneidemme kanssa, ja kiinalaisten tutkimusinstituutioiden avulla toimintamme on nopeampaa, tehokkaampaa ja entistä käytännöllisempää Luca Bochese lisää.<br /><br /><span style="color: rgb(0, 0, 153); font-weight: bold;">Koulutus</span><br />Uuden Pekingin sivuliikkeen toinen tärkeä toimiala tulee olemaan metrologian ja CNC -järjestelmiin liittyvä koulutusohjelma. Feanor on mukana ammatillisessa koulutusohjelmassa, jota johtaa Kiinan opetusministeriö, ja johon osallistuu 14 000 eritasoa edustavaa teknistä ja ammatillista oppilaitosta.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-8553181788208805658?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-39188348284157067732008-11-19T09:49:00.000-08:002009-01-18T19:40:27.507-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_exJ1HPwfImg/SXP2IKLAw_I/AAAAAAAAAXA/CAbBVRGlmWE/s1600-h/feanor+small.JPG"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 234px; height: 320px;" src="http://2.bp.blogspot.com/_exJ1HPwfImg/SXP2IKLAw_I/AAAAAAAAAXA/CAbBVRGlmWE/s320/feanor+small.JPG" alt="" id="BLOGGER_PHOTO_ID_5292844607120393202" border="0" /></a>Feanor rajab 2009. aastal Pekingisse filiaali, et olla suuteline kiiremini vastama klientide päringutele õhusõidukite suure kasuteguriga turbiinivõlli ja –laba tootmise ja <span style=""> </span>elektrijõuseadmete arendamisse osas. Otsus langetati pärast kaheaastast osalemist Hiina elektrienergia tootmise ning liikurite tehnoloogia ja kaitsetehnoloogia turul. <span style=""> </span><o:p></o:p><p></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">“Hiina on igati suurim turustamisvõimalus meie metroloogiatoodetele ja spetsiaalsetele lõikeriistadele”, ütleb Luca G. Bochese (Feanor CEO). Hiina üksinda moodustab üle 53% meie ülemaailmsest potentsiaalist, sellele järgneb USA (10%), India (9%), Itaalia (9%) ja teised EL riigid, kaasa arvatud Venemaa, kes väga kiiresti oma potentsiaali suurendab. Me otsustasime alustada spetsiaalse lõikeriista konstruktsiooniga, kuid me kavatseme laieneda kõikides teistes Feanori tegevusvaldkondades, kaasa arvatud metroloogia ja tarkvara.<o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">Me patenteerisime 2007. a oktoobris männipuidu uue kõvasulamist lõiketera tehnoloogia sisemise jahutusega, mis võimaldab vähendada töötlemisaega 1400 tunnilt 900 tunnile, millega kaasneb säästmine lõikeinstrumendi maksumuse osas. Selle tehnoloogia, millega kaasnevad suured lõikejõud, kasutamine nõuab kaasaegseid ja jäike tööpinke ning me oleme nüüd demonstreerinud neid eeliseid mitmes suures turbiinseadmes Hiinas ja <st1:place st="on"><st1:country-region st="on">Indias</st1:country-region></st1:place>. <o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">Hiina on ühtlasi saanud kolmandaks suureks tööpinkide tootjaks, ületades Itaalia positsiooni, kuigi Itaalia hoiab endiselt head positsiooni automaatpinkide, eriotstarbeliste tööpinkide ja kõrgekvaliteediliste “nišitööpinkide” osas. Meie Doppleri laserinterferomeeter, mis töötati välja koos Wroclawi Tehnikaülikooliga ja eelmine teisaldatav <span style=""> </span>laserdiood-kalibreerimisseade, mis töötati välja koos Braunschweigi õppeasutusega PTB (Physikalisch Technische Bundesanstalt), on saanud Hiinas väga populaarseks ning võimaldavad tööpinkide tootjatel oluliselt parandada <span style=""> </span>selliseid parameetreid nagu tööpinkide telgede sirgjoonelisus, lineaarsus, tasapinnalisus ja vertikaalsus.<o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">“Veelgi enam”, jätkab Luca Bochese, “uurimistöö teostamine Hiinas on nüüd saanud meile “kohustuseks”. Mitmed meie ettepanekud on osutunud Hiina ameti- ja teadusasutuste, kellega meil on olnud pikaajalised kohtumised, jaoks väga huvitavateks. Sellisteks ettepanekuteks on: helikopteri ülekandemehhanismide majanduslikult tasuv tootmistehnoloogia, mis suurendab õhusõiduki töökindlust ja aitab kaasa õhusõiduki kaalu vähendamisele, optilised mõõtesüsteemid komplekssete lõikeriistade jaoks, männipuidu lõiketerade taasteritamistehnoloogia (Hiina on praegu suurim turbiinivõllide tootja GE, Siemensi, Alsthomi, Mitsubishi litsentsi põhjal) ja teised eesrindlikud mõõtetehnoloogiad.” <span style=""> </span><o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><!--[if gte vml 1]><v:shape id="_x0000_s1028" type="#_x0000_t75" style="'position:absolute;left:0;"> <v:imagedata src="file:///C:\DOCUME~1\User\LOCALS~1\Temp\msohtml1\01\clip_image003.emz" title=""> <w:wrap type="square"> </v:shape><![endif]--><!--[if !vml]--><!--[endif]--><span style="font-family:Arial;">“EL ei ole kunagi rahastanud meie projekte peale standardeid ja mõõtmisi käsitleva projekti FP4 SMT 1999. a, mis aitas meil teisaldatava laserkalibreerimisseadme jaoks andmehõive tarkvara tehnilist lahendust välja töötada”, ütleb Luca Bochese. <span style=""> </span><o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">Meie uurimisettepanekud on sihtaladele plaanitud, need on alati esile kutsutud kliendi spetsiifiliste soovide tõttu, lühiajalised (mitte üle 2 aasta), kolme või nelja partneriga ja alati väikese maksumusega, kuid EL raamprogrammid eelistavad finantseerida suurt projekti seestöötlemise (IP), tippkeskuste võrgustiku (NOE) jt kujul, mis ületab niinimetatud kriitilist massi ning nõuab sageli mitmeid tuhandeid eurosid ja hulka partnereid.<o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;">Meie ettepanekuid on põhjendatult peetud liiga väikesteks, isegi kui mõned EL ametnikud, kellega me oleme kohtunud, on kinnitanud, et meie ettepanekud olid huvitavad, väga praktilised ja neil võiks olla väga kõrge edukustegur ning need võiksid anda "tõeliselt" innovatiivse toote. <o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style="font-family:Arial;"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span lang="NO-BOK" style="font-family:Arial;">“Meile tundub, et sageli ei kasutata EL finantseerimist sihtotstarbeliseks uurimistööks ja investeerimiseks tarkvarasse, instrumentidesse ja inimestesse, vaid väga suur osa kaob bürokraatlikesse kõrvaltegevustesse. <o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><!--[if gte vml 1]><v:shape id="_x0000_s1027" type="#_x0000_t75" style="'position:absolute;left:0;"> <v:imagedata src="file:///C:\DOCUME~1\User\LOCALS~1\Temp\msohtml1\01\clip_image005.jpg" title="China has the highest potential for development of high manufacturing and measuring technologies"> <w:wrap type="square"> </v:shape><![endif]--><!--[if !vml]--><!--[endif]--><span lang="NO-BOK" style="font-family:Arial;">Tihti ei loo see uusi turustatavaid tooteid tehnikavaldkonnas. <o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span lang="NO-BOK" style="font-family:Arial;">Me loodame, et tulevikus Hiina partneritega tihedat koostööd tehes ja Hiina ametiasutuste toetusel oleme me suutelised saavutama kiirema, efektiivsema ja praktilisema lähenemise”, lõpetab Luca Bochese.<o:p></o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style=";font-family:Arial;color:blue;" lang="NO-BOK"><o:p> </o:p></span></p> <p class="MsoNormal" style="text-align: justify;"><span style=";font-family:Arial;color:blue;" lang="NO-BOK"><a href="http://www.feanor.com/">www.feanor.com</a><o:p></o:p></span></p><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-3918834828415706773?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-33210339170596850892008-05-22T13:12:00.000-07:002008-05-23T15:26:34.931-07:00<a href="http://www.feanor.com/las30.jpg"><img style="margin: 0px 10px 10px 0px; float: left; width: 384px; height: 293px;" alt="" src="http://www.feanor.com/las30.jpg" border="0" height="233" /></a>Лазерная интерферометрическая измерительная система производства <a href="http://www.feanor.com/laser_ru.htm">FEANOR</a> (лазерный интерферометр FEANOR) позволяет осуществлять всеобъемлющую проверку станков, измеряя широкий спектр их геометрических и динамических характеристик (измерения перемещения, скорости, угловых перемещений (по углам рысканья и тангажа), плоскостности, параллельности и перпендикулярности).<br />Система имеет модульную конструкцию, что позволяет выбрать необходимые компоненты для того, чтобы осуществлять измерения определенного типа.<br /><br /><a href="http://www.feanor.com/laser_ru.htm"><strong><span style="color: rgb(204, 0, 0);">Системы для проверки точности и калибровки станков и координатно-измерительных машин</span></strong></a><br />Одна из самых точных и гибких систем лазерной калибровки. Типичное применение оценке точности станков, CMM (три координировать измерительные машины), даже ссылки и других линейных систем позиционирования.лп 30 Лазер-интерферометр систем может быть использовано для определения местоположения и линейных прямолинейности ошибки в машине топорами.Повышение производительности с помощью целенаправленных сохранение и правильное позиционирование для линейных ошибок, используя ошибку компенсации (воздушные и материальные температуры, влажности и атмосферного давления).Очень компактный, надежный и экономически эффективным.Программное обеспечение в соответствии следующий стандарт: PN - 93 M55580, ISO / DIS 230, PN - 93 M55580, ISO 230-2, NMTBA, VDI / DGQ 3441 BSI и BS 4656 Часть 16.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-3321033917059685089?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-61606594930118344772008-05-03T05:02:00.000-07:002008-12-09T16:22:19.215-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_exJ1HPwfImg/SBxWNHHfzvI/AAAAAAAAAMY/hVNxBmBBus4/s1600-h/logo+gimt.jpg"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 359px; height: 88px;" src="http://2.bp.blogspot.com/_exJ1HPwfImg/SBxWNHHfzvI/AAAAAAAAAMY/hVNxBmBBus4/s320/logo+gimt.jpg" alt="" id="BLOGGER_PHOTO_ID_5196122853327490802" border="0" /></a><strong>GIMT 2008 - Soluzioni tecniche nell'asportazione di truciolo per il mercato della Cina meridionale<br /></strong>Dal 16 al 19 giugno 2008 Feanor e UFP saranno presenti alla fiera di Guangzhou (Padiglione 1- stand, Feanor presenterà una relazione tecnica sull'evoluzione della tecnologia di taglio con due soli utensili (una sgrossatura dal pieno ed una successiva finitura), ed illustrerà i <a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/SBxV_3HfzuI/AAAAAAAAAMQ/mrVE2-vQ2_8/s1600-h/pino3.jpg"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 178px; height: 134px;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/SBxV_3HfzuI/AAAAAAAAAMQ/mrVE2-vQ2_8/s320/pino3.jpg" alt="" id="BLOGGER_PHOTO_ID_5196122625694224098" border="0" /></a>risultati ottenuti in Italia.<br /><br /><p><strong>GIMT 2008 -</strong><br /><strong>Presenting high-tech solutions to the southern Chinese machine tool and metalworking market</strong></p> <p>GIMT 2008 will present itself as CANTON MACHINE TOOL FAIR. As the successor of the wellknown GIMT+AMB China, the event will be characterised by advanced concepts and will establish the GIMT as the meeting point of the entire machine tool industry in South China.</p> <p><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_exJ1HPwfImg/SBxW-3HfzwI/AAAAAAAAAMg/U1ved760u8k/s1600-h/DSCI0411.JPG"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer;" src="http://1.bp.blogspot.com/_exJ1HPwfImg/SBxW-3HfzwI/AAAAAAAAAMg/U1ved760u8k/s320/DSCI0411.JPG" alt="" id="BLOGGER_PHOTO_ID_5196123708025982722" border="0" /></a>462 national and international companies presented their latest machine tool and metalworking innovations on an exhibition area of 15,727 sqm from June 15-18, 2007. For the upcoming event, the organisers expect well over 500 exhibitors on a total area of 20,000 sqm at Guangzhou’s state-of-the-art fairground.</p><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6160659493011834477?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-62990270698704774872008-05-03T04:44:00.000-07:002008-12-09T16:22:19.333-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_exJ1HPwfImg/SBxSVXHfztI/AAAAAAAAAMI/6JYNw3Vw8YE/s1600-h/anova2.bmp"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer;" src="http://3.bp.blogspot.com/_exJ1HPwfImg/SBxSVXHfztI/AAAAAAAAAMI/6JYNw3Vw8YE/s320/anova2.bmp" alt="" id="BLOGGER_PHOTO_ID_5196118597014900434" border="0" /></a>Фирма Feanor проектирует и поставляет высококачественные специальные режущие инструменты (HSS), сверла, резцы, развертки, метчики, карбидные заостренные наконечники и фрезы. Рабочие инструменты, к которым предъявляются высокие требования, изготовлены по заказу клиента в соответствии со стандартами ISO и AQAP, мы сбываем на рынках в Европе, а также во всем мире ( Сингапуре, ЮАР, Южной Америке). Наши инструменты увеличивают производительность механизмов в авиации, в оборонной и автомобильной промыщленности, кораблестроении, нефтепромышленности, станках, литейном, штамповочном, пласт и машиностроительном производстве. Мы готовы оказать техническую помощь по всем интересующим Вас вопросам. Для этого просим<br />отправить нам факсом или электронной почтой свои чертежи или эскизы вместе со спецификациями.<br />Мы сразу же вышлем Вам ответ вместе с дополнительными материалами и расценками. Вы также можете послать нам необходимую информацию (материалы, типы машин и параметры, операции, охлаждающую жидкость) и мы сконструируем для Вас нужный инструмент, при пользовании которым уменьшатся расходы на механизмы и<br />увеличится продуктивность работы.<br />Наша фирма также разрабатывает и внедряет<br />Oбеспечение во многих областях техники, включая статистический контроль процесса (SPC), актцептированием образцов (MIL STD 105, MIL STD 414, MIL STD 1235), сбора информации в автоматических и не автоматических производственных процессах (Flexible Manufacturing Systems), калибрование измeрительных инструментов (нониус, блокирующие измерители, микрометры вала и для измирения отверстий дигитальные и стрелочные измерительные приборы, измерители высоты), оптимизируем параметры режущих инструментов.<br />Позвоните или пошлите нам факс, если Вы желаете получить больше информации о наших консультациях в следующих областях:<br /><br />Промышленная метрология - лазер-интерферометрия<br />Мы участвуем в Европейских исследовательских проектах (SMT - стандарты, измерение и тестирование) измерители и калибрирование измерительных предметов, а также развитие новой продукции.<br />Те производственные фирмы, которые заинтересованы в совместной<br />работе по этим сферам, просим связаться с нами по электронной почте и мы с удовольствием пошлем Вам дополнительную информацию.<br /><br />Системы обработки данных<br />Мы можем помочь Вам создать отдел по контролю за качеством, где используется обеспечение<br /><br />Учебные курсы, где обучают статистический контроль процесса (SPC), соответствию требованиям образцов (Sampling Acceptance), CSP (Continuous Sampling Plans), ISO и MIL стандартам, FMEA (Failure Modes and Effects Analysis - FMEA - анализ потенциальных проблем и анализ видов и последствий отказов), DOE (Design of Experiments FMEA - анализ потенциальных проблем и анализ видов и последствий отказов ), MSA (анализ систем измерения R&amp;R - Repeatability &amp; Reproducibility), промышленной метрологии.<br />Курсы проводятся на английском, немецком, итальянском и французком языках.<br />И их можно организовать на рабочем месте клиента.<br />Технические переводы (итальянский, английский, немецкий, французкий, русский и эстонский языки).<br />Мы предлагаем переводы (письменные и устные) на презентациях, конференциях и встречах. Наша специализация - это технические переводы, мы также занимаемся переводами юридических и коммерческих текстов c вышеупомянутых языкoв.<div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6299027069870477487?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com1tag:blogger.com,1999:blog-2684962155368788201.post-82943128016884439292007-10-12T11:56:00.001-07:002008-12-09T16:22:20.411-08:00<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_exJ1HPwfImg/Rw_FooQPlZI/AAAAAAAAAKw/OTwtpjheeHw/s1600-h/ali17.jpg"><img id="BLOGGER_PHOTO_ID_5120528603134530962" style="FLOAT: left; MARGIN: 0pt 10px 10px 0pt; CURSOR: pointer" alt="" src="http://3.bp.blogspot.com/_exJ1HPwfImg/Rw_FooQPlZI/AAAAAAAAAKw/OTwtpjheeHw/s320/ali17.jpg" border="0" /></a><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><span style="COLOR: rgb(0,0,153);font-size:130%;" ><span style="FONT-WEIGHT: bold">EICC 2008 Exhibition plan</span></span> <?xml:namespace prefix = o /><o:p></o:p></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >Press release<br />Estonian Italian Chamber (<a href="http://www.blogger.com/www.italiaestonia.it%29"><b></b></a><b><a href="http://www.italiaestonia.it/">http://www.italiaestonia.it/</a> )</b> is planning participation to technical and subcontracting exhibitions in 2008.<br />If your company is interested in participating to a joint stand in one or more of these following exhibitions in 2008 (<?xml:namespace prefix = st1 /><st1:country-region st="on">China</st1:country-region>, <st1:country-region st="on">Italy</st1:country-region> or <st1:place st="on"><st1:country-region st="on">Turkey</st1:country-region></st1:place>), please let us know as soon as possible.<br />Please visit the related links to check if exhibition (industrial, machine tools, subcontracting) fits your requirements. Participation to exhibition might be financially supported, you would have to pay your travel and accommodation or a small participation fee, according to number of participants.<br /><span style="FONT-WEIGHT: bold;font-size:180%;" ><br /></span><span style="COLOR: rgb(204,0,0); FONT-STYLE: italicfont-size:180%;" >Deadline for application is 15 November 2007!!!</span><br /><br /><b><span style="COLOR: rgb(204,0,0)">CHINA</span></b> selected shows:<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.chinaimpe.com.cn/">http://www.chinaimpe.com.cn/</a><a href="http://www.chinaimpe.com.cn/"> </a>in Tianjin - March 2008<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.blogger.com/www.chinaimpe.com.cn"></a></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.gimt.com.cn/">http://www.gimt.com.cn/</a> in Guangzhou - June 2008<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.metalworkingchina.com/">http://www.metalworkingchina.com/</a> in Shanghai - November 2008<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.gimee.com.cn/">http://www.gimee.com.cn/</a> in Guangzhou - December 2008<br /><br /><b><span style="COLOR: rgb(204,0,0)">ITALY</span></b> shows<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.senaf.it/fiera.asp?FieraId=117">http://www.senaf.it/fiera.asp?FieraId=117</a> MECSPE Subcontracting- in Parma March 2008<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.bimu-sfortec.com/">http://www.bimu-sfortec.com/</a> Subcontracting - in Milan 7-10 October<br /><br /><b><span style="COLOR: rgb(204,0,0)">TURKEY</span></b> show<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.industrialfair.net/">http://www.industrialfair.net/</a> SUBCON (Subcontracting) 10-13 April 2008<br /><br />-----------------------------------------------------------------------------------------------<br /><br /></span><span style="FONT-WEIGHT: bold; COLOR: rgb(0,0,153)font-family:arial;font-size:130%;" >Itaalia Eesti kaubanduskoja teade - 2008 tehnikamessid</span><br /><pre style="COLOR: rgb(0,0,153);font-family:arial;" ><span style="font-family:arial;">Juhul, kui Teie firma on huvitatud osalemas ühisstendil ühes või mitmes 2008. aastal toimuvates messides (Hiina, Itaalia, Türgi), palume soovist meile teada anda võimalikult kiiresti. Täiendava info saamiseks palume tutvuda alljärgnevate linkidega (tööstus, tööstusseadmed- ja tarvikud, allahange) ja valida kõige sobivam teema. Programm võib katta messil osalemise kulud; sõidu- ja majutuskulud ning osalemistasu kannab ettevõtja ise. Maksumus vastavalt osalejate arvule.<br /></span><span style="font-size:130%;"><br /><span style="FONT-WEIGHT: bold; COLOR: rgb(204,0,0)font-family:arial;" >Registreerimise tähtaeg: 15 november 2007 !</span></span><br /><br /><span style="font-family:arial;"><span style="COLOR: rgb(204,0,0);font-size:130%;" ><span style="FONT-WEIGHT: bold">Hiina näitused (lingid): </span></span><br /></span><span style="FONT-VARIANT: normal! important"><a href="http://www.chinaimpe.com.cn/"><span style="font-family:arial;">http://www.chinaimpe.com.cn/</span></a><a href="http://www.chinaimpe.com.cn/"><span style="font-family:arial;"> </span></a><span style="font-family:arial;">in Tianjin - March 2008<br /></span></span><span style="FONT-VARIANT: normal! important"><a href="http://www.gimt.com.cn/"><span style="font-family:arial;">http://www.gimt.com.cn/</span></a><span style="font-family:arial;"> in Guangzhou - June 2008<br /></span></span><span style="FONT-VARIANT: normal! important"><a href="http://www.metalworkingchina.com/"><span style="font-family:arial;">http://www.metalworkingchina.com/</span></a><span style="font-family:arial;"> in Shanghai - November 2008<br /></span></span><span style="FONT-VARIANT: normal! important"><a href="http://www.gimee.com.cn/"><span style="font-family:arial;">http://www.gimee.com.cn/</span></a><span style="font-family:arial;"> in Guangzhou - December 2008<br /><br /><b><span style="COLOR: rgb(204,0,0)">ITALY</span></b> </span></span><span style="font-family:arial;"><span style="COLOR: rgb(204,0,0);font-size:130%;" ><span style="FONT-WEIGHT: bold">näitused</span></span><br /></span><span style="FONT-VARIANT: normal! important"><a href="http://www.senaf.it/fiera.asp?FieraId=117"><span style="font-family:arial;">http://www.senaf.it/fiera.asp?FieraId=117</span></a><span style="font-family:arial;"> MECSPE Subcontracting- in Parma March 2008<br /></span></span><span style="FONT-VARIANT: normal! important"><a href="http://www.bimu-sfortec.com/"><span style="font-family:arial;">http://www.bimu-sfortec.com/</span></a><span style="font-family:arial;"> Subcontracting - in Milan 7-10 October<br /><br /><span style="FONT-WEIGHT: bold; COLOR: rgb(204,0,0)">TURKEY</span><span style="FONT-WEIGHT: bold"> </span></span></span><span style="font-family:arial;"><span style="FONT-WEIGHT: bold; COLOR: rgb(204,0,0)font-size:130%;" >näitused</span><br /><span style="FONT-VARIANT: normal! important"><a href="http://www.industrialfair.net/">http://www.industrialfair.net/</a> SUBCON (Subcontracting) 10-13 April 2008</span></span><br /></pre><span style="FONT-VARIANT: normal! important;font-family:Arial;" >-------------------------------------------------------------------------------------------------------<br /></span><span style="FONT-WEIGHT: bold;font-size:130%;" ><span style="font-family:arial;">Пресс-релиз -технический план выставок 2008 года.</span></span><br /><div style="font-family:arial;"><p class="MsoNormal"><span style="font-family:arial;">Если ваша компания заинтересована в участии по совместным выставкам 2008 года ( в дной или нескольких) по городам Китая, Италии, Турции сообщите нам как можно скорее. <span roman="" new="" times=""><o:p></o:p></span></span></p></div><div><p class="MsoNormal"><span style="font-family:arial;">Посетите ссылки, чтобы убедиться, в том ,что выставки в области промышленности, станкостроения, субподряда соответствует вашим требованиям.<br />Участие в выставке может быть профинансировано, но Вам придется оплатить проезд и проживание или небольшую плату в соответствии с числом участников.<br /></span></p></div><span style="FONT-VARIANT: normal! important"><b><a href="http://www.italiaestonia.it/"><span style="font-family:arial;">http://www.italiaestonia.it/</span></a><span style="font-family:arial;"> </span></b></span><br /><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" ><br /><b><span style="COLOR: rgb(204,0,0)">В Китае</span></b><br />отдельных показывает:<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" ><a href="http://www.blogger.com/www.chinaimpe.com.cn">www</a><a href="http://www.chinaimpe.com.cn/"><span lang="RU">.</span>chinaimpe<span lang="RU">.</span>com<span lang="RU">.</span>cn</a></span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > в Тяньцзине - март 2008<br /></span><a href="http://www.gimt.com.cn/"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>gimt<span lang="RU">.</span>com<span lang="RU">.</span>cn</span></a><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > в Гуанчжоу - июнь 2008<br /></span><a href="http://www.metalworkingchina.com/"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>metalworkingchina<span lang="RU">.</span>com</span></a><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > в Шанхае - ноябрь 2008<br /></span><a href="http://www.gimee.com.cn/"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>gimee<span lang="RU">.</span>com<span lang="RU">.</span>cn</span></a><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > в Гуанчжоу - декабрь 2008<br /><br /><b><span style="COLOR: rgb(204,0,0)">В Италии</span></b><br /></span><a href="http://www.senaf.it/"></a><a href="http://www.senaf.it/fiera.asp?FieraId=117"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>senaf<span lang="RU">.</span>it</span></a><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >MECSPE</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > Субподряд - март 2008<br /></span><a href="http://www.bimu-sfortec.com/"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>bimu<span lang="RU">-</span>sfortec<span lang="RU">.</span>com</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span></a><span style="FONT-VARIANT: normal! important;font-family:Arial;" >Subcontracting</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > - в Милане 7-10 октября 2008<br /><br /><b><span style="COLOR: rgb(204,0,0)">В Турции</span></b><br /></span><a href="http://www.industrialfair.net/"><span style="FONT-VARIANT: normal! important;font-family:Arial;" >www<span lang="RU">.</span>industrialfair<span lang="RU">.</span>net</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span></a><span style="FONT-VARIANT: normal! important;font-family:Arial;" >SUBCON</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > - 10-13 апреля 2008<br /><br /><span style="FONT-WEIGHT: bold; COLOR: rgb(204,0,0); FONT-STYLE: italicfont-size:180%;" >Крайний срок для участия 15 ноября 2007!!!</span><br />-------------------<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >Relevant</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >keywords</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > - Соответствующие ключевые слова:<br /></span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >subcontracting</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >shows</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >N</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >ä</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >itused</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >hiina</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >itaalia</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >messid</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > 2008, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >masinaehitus</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >metallit</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stuse</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >allhange</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >t</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stuslik</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >allhange</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >t</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stuslikud</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >materjalid</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >metalli</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >- </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >ja</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >masinat</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stus</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >kummi</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >- </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >ja</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >plastit</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stus</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >elektroonika</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >- </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >ja</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >elektrotehnikat</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stus</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >t</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >öö</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >stusseadmed</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" > </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >ja</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" > -</span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >tarvikud</span><span lang="RU" style="FONT-VARIANT: normal! important;font-family:Arial;" >, выставки в китае В Италии В Турции 2008, субподряда, станки и режущие инструменты, технической выставки в Италии и Турции 2008, производства, 2008 план выставки </span><span style="FONT-VARIANT: normal! important;font-family:Arial;" >EICC</span><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-8294312801688443929?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-55209600652595452252007-06-10T13:42:00.000-07:002008-12-09T16:22:20.984-08:00<a href="http://3.bp.blogspot.com/_exJ1HPwfImg/Ro9HTvfLo4I/AAAAAAAAAEU/fWUKTuIoE4A/s1600-h/mig.jpg"><img id="BLOGGER_PHOTO_ID_5084360908814918530" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 408px; CURSOR: hand; HEIGHT: 275px" height="228" alt="" src="http://3.bp.blogspot.com/_exJ1HPwfImg/Ro9HTvfLo4I/AAAAAAAAAEU/fWUKTuIoE4A/s320/mig.jpg" width="350" border="0" /></a><br /><div><div>Компания Boch, совмесно с компанией UFP, разработала новое поколение специальных фрезов и специально режущих инструментов, предназначеных для работы с газовыми турбинами. Недавно проведенные эксперименты в Китае и Индии на фабриках двух важных производителей энерго и аеротурбин показали очень высокую способность к работе и качество поверхностной шлифовки, полученной всего лишь с помощью двух специальных фрез со внутренним охлаждением. <a href="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro9IDPfLo5I/AAAAAAAAAEc/DRxcohNiDjY/s1600-h/disegno.jpg"><img id="BLOGGER_PHOTO_ID_5084361724858704786" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 169px; CURSOR: hand; HEIGHT: 238px" height="316" alt="" src="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro9IDPfLo5I/AAAAAAAAAEc/DRxcohNiDjY/s320/disegno.jpg" width="203" border="0" /></a><br />Для более старых станков, была выработана другая фреза ASP30, также со внутренним охлаждением, отличающаяся от предыдущей которая сделана из цельного твердого металла. Длительность полной обработки одного винта было уменьшено с 1200 до 960 часов.<br />Этот же метод используется для обработки винтов для аеронавтики.<br />Для уточнений и информации свяжитесь с Luca Bochese в Италии по тел. 0039.3484121280</div></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-5520960065259545225?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-5643355200816444862007-05-22T10:23:00.000-07:002008-12-09T16:22:21.583-08:00<div><br /><br /><div><a href="http://2.bp.blogspot.com/_exJ1HPwfImg/Ro9klffLo6I/AAAAAAAAAEk/vUgu48x9fSI/s1600-h/TRIEBW.JPG"></a> <a href="http://4.bp.blogspot.com/_exJ1HPwfImg/RlMnRl50JwI/AAAAAAAAAD0/dEK2jB_UVEg/s1600-h/disegno.jpg"><img id="BLOGGER_PHOTO_ID_5067437188907804418" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://4.bp.blogspot.com/_exJ1HPwfImg/RlMnRl50JwI/AAAAAAAAAD0/dEK2jB_UVEg/s320/disegno.jpg" border="0" /></a><br /><div>UFP特殊切割工具和BOCH特殊切割工具设计部门在最近设计了一个新的前尖型的有效切割工具设备.作为一个与ASP30和硬钢混和的未加工和已完成的切割刀，对煤气汽轮机转子轴机器（目前最好的技术）只使用两种工具：一个前尖型的外观完整硬钢HM螺旋形3槽未加工的（削碎片波浪形内部冷却）和一个HM前尖型外观已加工或一个前尖型的外观ASP30未加工和HM加工，两者取一（如果机器硬作为第一选择并不是最适合的）。<a href="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro9k3PfLo7I/AAAAAAAAAEs/jFej5KYLF5U/s1600-h/400px-MiG-29-Draft_svg.png"><img id="BLOGGER_PHOTO_ID_5084393404537480114" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" height="180" alt="" src="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro9k3PfLo7I/AAAAAAAAAEs/jFej5KYLF5U/s320/400px-MiG-29-Draft_svg.png" width="134" border="0" /></a><a href="http://4.bp.blogspot.com/_exJ1HPwfImg/Ro-PJ_fLo-I/AAAAAAAAAFE/JVG1b0T-eP4/s1600-h/klimov.jpg"><img id="BLOGGER_PHOTO_ID_5084439906148393954" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 177px; CURSOR: hand; HEIGHT: 89px" height="150" alt="" src="http://4.bp.blogspot.com/_exJ1HPwfImg/Ro-PJ_fLo-I/AAAAAAAAAFE/JVG1b0T-eP4/s200/klimov.jpg" width="231" border="0" /></a>提供高机器硬工具和高压力冷冻系统是可行的，在增强机器性能上，这个设置被证明非常有效。单工具使用设备号是以2代替5，对于转子机器所有时间要从1200个小时降低到960个小时。新技术试验，有不同切割边缘号（3和4个槽，为了再尖锐）和两个不同削碎片已经在意大利和中国进行了彻底地检验。想了解更多信息请联系Luca Bochese 电话 0039.348.4121280</div></div></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-564335520081644486?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-64010434222380166872007-05-19T01:03:00.000-07:002008-12-09T16:22:21.735-08:00<a href="http://2.bp.blogspot.com/_exJ1HPwfImg/Roksi_fLo2I/AAAAAAAAAEE/zHFtuJ6VDQA/s1600-h/DSCN1350.JPG"><img id="BLOGGER_PHOTO_ID_5082642634133709666" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://2.bp.blogspot.com/_exJ1HPwfImg/Roksi_fLo2I/AAAAAAAAAEE/zHFtuJ6VDQA/s320/DSCN1350.JPG" border="0" /></a><br /><div>Boch und UFP (Italien) entwickeln und liefern Spezialschneidwerkzeuge (Fräser, Feinbohrwerkzeuge, Reibahlen, Bohrer, Gewindeschneidwerkzeuge) für hohe Zerspanungsleistung in der Luftfahrt-, Automobil-, <a href="http://3.bp.blogspot.com/_exJ1HPwfImg/Rk6v_l50JuI/AAAAAAAAADk/bUyjVGk5mzw/s1600-h/fresa2.JPG"></a>Verteidigungs- und Maschinenbauindustrie allgemein.<br /><div><br /><div><br /><div><a href="http://4.bp.blogspot.com/_exJ1HPwfImg/Rk6wY150JvI/AAAAAAAAADs/JKyvRJNfcbw/s1600-h/fresa3.JPG"><strong></strong></a><span style="color:#000099;"><strong>Neue Boch UFP Profilfräser</strong></span> aus Vollhartmetall (Mix Option in ASP 30 für ältere Werkzeugmaschinen) wurden erfolgreich bei Herstellern von Turbinenrotoren und Flugzeugmotoren in <span style="color:#000099;">China </span>und <span style="color:#000099;">India</span> getestet. </div><br /><div></div><br /><div>Optimale Ergebnisse wurden mit zwei Vollhartmetall Profilfräser mit Innenkühlung erreicht, die einen kompletten Set von 5 Werkzeugen (HSS und Wendeschneidplatten) ersetzt haben.</div><div></div><br /><div>Mit den VHM-Werkzeuge wird die Vorbereitung mit Kegelfräser nicht merhr erfordert. Wenn verfügbar, wird natürlich die Lebensdauer der Fräser um 100% verlängert.</div><br /><div>Alternativ für den ersten VHM-Fräser, für Einsatz in älteren Maschinen, wurde ein ASP30 mit Innenkühlung und Beschichtung entwickelt.<br /></div><div>Dank den zwei neuen Werkzeugen wurde die Bearbeitungszeit für den kompletten Rotor von 1200 Stunden bis nach 960 Stunden verringert.Standardparameter, mit der Anwendung vom VHM-Werkzeugenpaar mit 4 geraden Nuten (Nachschleifen wird dann erleichtert) , sind 500 rpm und 26 mm/min für Fräsen und 850 rpm und 80 mm/min für Feinbearbeitung.</div><br /><div>Noch bessere Parameter werden mit Einsatz von 3 Winkelschneidkanten erreicht (Patent für diese Neuentwicklung wurde schon gemeldet).</div><div></div><div></div><div></div><div></div><div></div><div></div><div></div><div></div><br /><div>Internationale Hersteller von Standard- und Spezialschneidwerkzeugen werden direkt von UFP mit besten Entwicklungsdienstleistungen, Preis/Leistungsverhältnis und kurze Lieferzeiten beliefert.</div><div></div><div>Besonders für kurze und dringende Serien und Entwicklung von neuen Produkten (bevor diese auf dem Markt offiziell vorgestellt werden) wird UFP Partner von den besten internationalen Anbietern und Werkzeugherstellern in der Zerspanungstechnik kontaktiert, selbsverständlich kann aber UFP auch direkt Endkunden liefern.</div><div>Ihr Ansprechpartner Luca Bochese 0039.348.4121280, 0151.53028789 in Deutschland.</div><div>Halle 2, Stand C80 EMO Hannover</div></div></div></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-6401043422238016687?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0tag:blogger.com,1999:blog-2684962155368788201.post-48719264883427153712007-05-15T01:58:00.000-07:002008-12-09T16:22:22.567-08:00<a href="http://1.bp.blogspot.com/_exJ1HPwfImg/RokvovfLo3I/AAAAAAAAAEM/d6FEsCAD18A/s1600-h/DSCN1350.JPG"><img id="BLOGGER_PHOTO_ID_5082646031452840818" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://1.bp.blogspot.com/_exJ1HPwfImg/RokvovfLo3I/AAAAAAAAAEM/d6FEsCAD18A/s320/DSCN1350.JPG" border="0" /></a> Boch ha sviluppato con UFP una nuova generazione di frese a pino speciali di sgrossatura e finitura per lavorazione su alberi rotore di turbine a gas .<br /><div><br /><div>I test recentemente effettuati presso due importanti produttori di turbine per produzione energia e per impiego aeronautico in <span style="color:#000099;">India </span>e <span style="color:#000099;">Cina </span>hanno dimostrato l'elevata efficienza nella lavorazione e la qualità della finitura superficiale ottenuta <strong>con </strong><span style="color:#000099;"><strong>due sole frese speciali integrali rivestite, con lubrificazione interna</strong>.</span> Per le macchine piu' obsolete e' stata scelta una fresa di sgrossatura in ASP30 rivestita, con lubrificazione interna, come alternativa rispetto alla prima fresa di sgrossatura in metallo duro integrale.</div><div>La lavorazione completa di un rotore è stata ridotta da 1200 ore a 960 ore, sostituendo la precedente tecnologia, basata su cinque utensili ad inserti e in HSS, con due soli utensili in metallo duro integrale rivestiti: una fresa a profilo di sgrossatura direttamente dal pieno, in grado di completare circa 20 cave prima della riaffilatura, ed una fresa di finitura.</div><br /><div>I parametri consigliati sono di 600 pm e avanzamento 26 mm/min per sgrossatura e di 850 rpm e 130 mm/min per finitura. Questi parametri vengono ulteriormente migliorati utilizzando la fresa di sgrossatura a tre taglienti in elica. Nel caso la cava del rotore (sede aggancio paletta) venga già preparata con una fresa conica, e' possibile aumentare del 100% la vita dell'utensile prima della successiva riaffilatura. <a href="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro-NGPfLo9I/AAAAAAAAAE8/eivzCHayGyc/s1600-h/turbineNG.jpg"><img id="BLOGGER_PHOTO_ID_5084437642700628946" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" height="119" alt="" src="http://1.bp.blogspot.com/_exJ1HPwfImg/Ro-NGPfLo9I/AAAAAAAAAE8/eivzCHayGyc/s200/turbineNG.jpg" width="195" border="0" /></a></div><br /><a href="http://2.bp.blogspot.com/_exJ1HPwfImg/Ro-LxffLo8I/AAAAAAAAAE0/y9BC0cMoXuw/s1600-h/mig12.JPG"><img id="BLOGGER_PHOTO_ID_5084436186706715586" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 180px; CURSOR: hand; HEIGHT: 105px" height="102" alt="" src="http://2.bp.blogspot.com/_exJ1HPwfImg/Ro-LxffLo8I/AAAAAAAAAE0/y9BC0cMoXuw/s200/mig12.JPG" width="171" border="0" /></a><br /><div>Lo stesso principio viene ora applicato nella lavorazione dei rotori e palette dei propulsori aeronautici di nuova generazione, che verranno realizzati su licenza in India.<br /></div><div></div><br /><div></div><div></div><br /><div>Per maggiori informazioni contattare Luca Bochese 348.4121280 in Italia, +372.6207825 in Estonia oppure 0086.137.17978084 in Cina (Beijing)</div></div><div class="blogger-post-footer"><img width='1' height='1' src='https://blogger.googleusercontent.com/tracker/2684962155368788201-4871926488342715371?l=spezialschneidwerkzeuge.blogspot.com' alt='' /></div>Feanor OUhttp://www.blogger.com/profile/15261018881495051102noreply@blogger.com0